Fried SD-Card reader - no firmware
-
So, my board will not show any memory containing firmware or DWC. I thin k i may have short-circuited the board somewhere in that i do believe i dropped a tiny piece of tin coated copper stranding wire into the board at some point and then bumped the piece into the perfect possition to short out a critical piece of hardware component. When I tyy to use /access DWC I get an endless loop of nothing as well as no response from terminal. Its been a while since ive had time to conquer this projects desired conclusion and fix the dang thing. I find it difficult to proceed without any help. Thanks.
-
@CrooKID Follow this guide and report back what does and does not work. What board is this? It may be just the firmware has been erased and needs re-flashing. See https://docs.duet3d.com/User_manual/Troubleshooting/Duet_wont_respond
Ian
