Does the Duet3D Accelerometer fit on the e3d V6 Hotend

[bleedfuel]

I would like to try input shaping on my Railcore II.

I currently have an E3D V6 Gold hot end with the Duet3 6HC board connected to an SBC. I was wondering if the Duet3D accelerometer fits this hot end?

Can this sensor mount to this hot end and how?

If there is a different sensor or way to connect it please let me know.

Thanks

[jay_s_uk]

@bleedfuel you would mount it between the nozzle and the heat block. Obviously this isn't a permanent installation but you only need to take all the readings at one time

[bleedfuel]

@jay_s_uk thanks that makes sense. Will try that out.