combining outputs on expansion board results in unknown pin
-
3.6.2 beta 2
I'm converting a Stratasys Dimension to Duet and recently picked up an expansion board so i can wire everything the way i want. Previously i used the following for the chamber heater:
M950 H3 C"out7+out8" T5
Expansion board connects fine, temp sensors work properly and each heater works independently:
M950 H3 C"1.out0" T5
M950 H3 C"1.out1" T5
but the following:
M950 H3 C"1.out0+1.out1" T5
Does not work and results in the following error:
Error in start-up file macro line 66: Unknown pin name '1.out1'
is there something I'm missing ?
-
-
@jay_s_uk Thank you !
That's simple enough it seems like i should have tried it, I'm grateful for your quick response sir !
