Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    [3.6.0-beta.3+1] Extruder stall detection

    Scheduled Pinned Locked Moved Unsolved
    Beta Firmware
    1
    2
    45
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Leonard03undefined
      Leonard03
      last edited by

      Hello everybody!
      Can anyone please confirm that extruder stall detection works on 3.6.0-beta.3 or +1 on a Duet2 WIFi?

      M915 P3 S-64 H10 or M915 E S-64 H10 should rise a stall event with virtually no movement, right?
      Move command is G1 H1 E70 F600, extruder is a Bondtech BMG, around 415 esteps
      Reducing motor current during this phase I tried from 10 to 80 percent
      Acceleration 3000mm/min
      Acceleration during homing move 1000mm/s

      1 Reply Last reply Reply Quote 0
      • Leonard03undefined
        Leonard03
        last edited by

        Remapping driver 3 from the extruder to an axis (V axis in my case) seems to rise the stall event. So it seems to be a bug with extruder stall detection in this version.
        By the way, during a move, M122 shows that the extruder SG is not available..

        1 Reply Last reply Reply Quote 0
        • Leonard03undefined Leonard03 marked this topic as a question
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA