[3.6.0-rc.1] Filament counters are not working
This topic was forked from Firmware bundle 3.6.0 release candidate 1 available
droftarts
-
Filament counters are not working on RC1
Australian design and build large scale 3d printers
https://aurarum.com.au -
@Aurimas I'd suggest creating a new thread (as requested above) and provide details of...
- What it is you are seeing.
- What you expect to see.
- Details of your configuration (SBC or standalone), config.g file (plus anything else that is relevant to this problem, like perhaps a sample gcode file that shows the issue).
- If this was working before what was the latest version that things were working on?
-
@Aurimas I can also confirm this has happened a few times on my machines.
If you can make a new thread, Ill post my config.g there for tracking and debugging
