Upgrading Duet 2 WiFi to latest

[jay_s_uk]

@martincho you need to upgrade to 2.05.01, then 3.0, then 3.3 and then 3.5.4
You can't go directly

[martincho]

@jay_s_uk Ah, OK. Tedious, but not a big deal. Will try now. Thanks.

[martincho]

@jay_s_uk Only problem is I can't find 2.05.01...

[jay_s_uk]

@martincho https://github.com/Duet3D/RepRapFirmware/releases/tag/2.05.1

[martincho]

@jay_s_uk OK, thanks for that. I am now upgraded to 3.5.4

However, I am getting this error on connect:

I checked config.g and I can't see anything obvious (the configuration worked fine before the update).

I remember seeing something about RRF 3 having some configuration differences with respect to v2. Do I need to rebuild my config from scratch using the configurator? It'd be nice if a conversion utility exists.

Thanks.

[martincho]

In case the numbers look weird...it's a custom ballscrew 3d printer.

[jay_s_uk]

@martincho best to start a fresh with the config tool and then put your numbers in

[droftarts]

@martincho said in Upgrading Duet 2 WiFi to latest:

I remember seeing something about RRF 3 having some configuration differences with respect to v2. Do I need to rebuild my config from scratch using the configurator? It'd be nice if a conversion utility exists.

Sorry, no conversion utility. See https://docs.duet3d.com/User_manual/RepRapFirmware/Migration_RRF2_to_RRF3

Ian

[martincho]

@droftarts Will do. Thanks.

[martincho]

@jay_s_uk said in Upgrading Duet 2 WiFi to latest:

@martincho best to start a fresh with the config tool and then put your numbers in

On it. I backed-up the SD card before the upgrade, so I have all the data and customization settings.

[martincho]

Thanks for the help, Everything is up and running after the update. Now looking to experiment with input shaping.