Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    U axis sensorless homing

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    1
    2
    482
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jmjcokeundefined
      jmjcoke
      last edited by

      I am have a problem with U axis not moving after I home the axis. I have setup sensorless homing for a U axis that is connected to the E0 position on a duet wifi. The axis moves as comanded via a macro for testing the sensorless homing settings. I adjusted the M915 S value and the U axis homes, I then home the delta xyz axis. Duet web interface show all axis homed but when I try to move the U axis via the jog buttons U does not move. Are any of the E parameters for the hotend temp active when you map an axis to E0?

      Joshua Coke

      Trick Laser Metal Max with Smart Effector
      Duet Wifi
      Zesty Nimble
      Mosaic Pallette+
      At work
      Renishaw AM250/400/ RenAM500M/500Q Powder Bed Fusion (Metal 3D Printers)

      1 Reply Last reply Reply Quote 0
      • jmjcokeundefined
        jmjcoke
        last edited by

        The problem was in M208, I had no S1 for min travel.

        Joshua Coke

        Trick Laser Metal Max with Smart Effector
        Duet Wifi
        Zesty Nimble
        Mosaic Pallette+
        At work
        Renishaw AM250/400/ RenAM500M/500Q Powder Bed Fusion (Metal 3D Printers)

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA