Release 2.01beta1 Machine control movements wrong

almstsobur

Core XY setup, Release 2.01beta1, with partner web control package. If I hit +100 Y or X it goes diagonal in the wrong direction and does not seem to be 100mm either. Does not effect printing as long as you dont do any manual control since a reboot. Otherwise the "off" mnaual control buttons seem to throw everything esqew.

-RP

Phaedrux

There is a newer beta of the DWC that has some fixes. Maybe give that a try.

https://forum.duet3d.com/topic/5485/duet-web-control-wishlist-notes-and-priorities/17

Danal

From the changelog for https://github.com/chrishamm/DuetWebControl/blob/dev/DuetWebControl-1.21.2-b2.zip

Bug fix: G1 S2 moves were incorrectly generated for jog movements on Delta and SCARA configurations

I am currently on

Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Electronics: Duet WiFi 1.02 or later
Firmware Version: 2.0(RTOS) (2018-06-05b3)
WiFi Server Version: 1.21
Web Interface Version: 1.21.2-b1

And DO see the issue on a Delta.

Danal

Upgrading to:

Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Electronics: Duet WiFi 1.02 or later
Firmware Version: 2.0(RTOS) (2018-06-05b3)
WiFi Server Version: 1.21
Web Interface Version: 1.21.2-b2

DID fix it, moves are now correct. Specifically, I DID upgrade the web interface, I DID NOT upgrade the firmware to Chris' branch.

Phaedrux

@danal I believe that Chris's branch is only necessary to be able to rename fans. But that's just my reading of his post.

Danal

@phaedrux said in Release 2.01beta1 Machine control movements wrong:

@danal I believe that Chris's branch is only necessary to be able to rename fans. But that's just my reading of his post.

Agreed.

That's exactly why I "tested" the B3 B1 combo... and I think we both read his post correctly!