New beta firmware 2.01beta1/1.21.2beta1 available

[dc42]

There is a b2 of DWC 1.21.2, it's in chrishamm's github repo.

[Barracuda72]

As David stated...no typo

[Iamturbo1978]

Hello,

I am getting an error that I know I am making happen. I currently have V2.0 and I tried to upgrade to 2.01. I downloaded "Duet2CombinedFirmware.bin, loaded it to my DuetWifi, try to update, and I get an error,
'Error: M997: In-application programming binary "iap4e.bin not found'

I know this has to be something I am missing, but I dont have any idea where to start looking to fix the problem. Hopefully someone can point me in the direction I need to go to fix this problem.

Thanks
TC

[Phaedrux]

Maybe try updating the IAP files again?

[dc42]

@iamturbo1978, download iap4e.bin from https://github.com/dc42/RepRapFirmware/releases/tag/2.0 and upload it through the Settings General page of DWC.

[Iamturbo1978]

@dc42, Wonderful. Thank you so much for the help.

[fma]

I just upgraded my DuetWifi will latest releases (Firmware 2.01beta1 / Web server 1.21 / Web interface 1.21.2-b2), and now, I can't home anymore; when I click on either 'home all/x/y/z' buttons, I get:

G28
Error: G0/G1: insufficient axes homed

What did I miss?

[dc42]

See the upgrade notes for release 1.21.

[fma]

Ok, need to add S3 to G0 command lifting Z before it is homed...

Thanks!

[deckingman]

@fma said in New beta firmware 2.01beta1/1.21.2beta1 available:

Ok, need to add S3 to G0 command lifting Z before it is homed...

Thanks!

Or, if you want to allow axis movement prior to homing, put M564 H0 in config.g.

[dc42]

@fma said in New beta firmware 2.01beta1/1.21.2beta1 available:

Ok, need to add S3 to G0 command lifting Z before it is homed...

Thanks!

S2, not S3.

[dc42]

I have added DWC 1.21.2-b2.zip to this beta release. I had already removed DWC 1.21.1-b1 from it.