Magball arm adapter
-
Hi, is it possible to just buy the Smart Effector for delta pcb magball arm adapters on there own?
-
@boldnuts the arms are made by Haydn Huntly he makes them in all sorts of lengths:
https://plus.google.com/+HaydnHuntley -
Hi sorry I meant the pcb adaptors that you guys make that normally comes with the smart Effector
-
If T3P3 doesn't have any spares, I have a set left over from prototyping. They don't have as many holes in them as the current production ones, but they have the 4 in a 20mm square for the carriage plus the 2 for the magballs.
-
@dc42 That would be great thanks, which would be the best way for me to purchase them from you, I am in the UK
-
Please use the contact form at http://escher3d.com/pages/contact/contactindex.php.
-
Hi,
Just out of curiosity why do need them?
Frederick
-
For a Tevo little monster, I have the smart effector but no adapters
-
Using the "factory" adapters is fantastic idea.
If, and only if YOU want to do so, you can also print adapters that fit HWIN style carriages. Specifically, these are for 9mm belts. They would also work fine for 6mm belts.
-
@boldnuts said in Magball arm adapter:
For a Tevo little monster, I have the smart effector but no adapters
If you are looking for adapters for rails in a delta I can provide you with a STL for the required spacing (or most any other spacing) and you could print your own.
Frederick
-
@boldnuts if you want to purchase the production version then please email info@duet3d.com otherwise getting a prototype from David should be cheaper.