Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    DWC 1.22 retraction while printing

    Scheduled Pinned Locked Moved
    General Discussion
    5
    10
    1.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jasperkmundefined
      jasperkm
      last edited by jasperkm

      Hi, I have set firmware retraction in my slicer and want to change retraction during print. Before it worked fine but after updating to new duet web interface 1.22 (duet 2 wifi) it doesnt work anymore. Gives me the following error.

      Sending M207 S3.4 R0 F4200 T1800 Z0.4 in Gcode console

      A JavaScript error has occurred so the web interface has closed the connection to your board. It is recommended to reload the web interface now. If this happens again, please contact the author and share this error message:

      Version: 1.22
      Message: TypeError: rememberedGCodes.indexOf is not a function
      URL: http://192.168.178.15/js/dwc.js
      Line: 1175:52
      Error object: {}

      1 Reply Last reply Reply Quote 0
      • AlexLinundefined
        AlexLin
        last edited by

        I also have this error for most of the time when doing it in the console.wil ltry upgrade to 1.22.2 and firmware 2.02beta

        1 Reply Last reply Reply Quote 1
        • dc42undefined
          dc42 administrators
          last edited by

          I have made chrishamm aware that several users have been getting this particular javascript error, however he is travelling so it may be a while before he can attend to this. If necessary I will look at doing a patch to fix it.

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          1 Reply Last reply Reply Quote 0
          • AlexLinundefined
            AlexLin
            last edited by

            upgraded to 2.02beta and DWC 1.22.1 with the same result

            1 Reply Last reply Reply Quote 0
            • Phaedruxundefined
              Phaedrux Moderator
              last edited by

              @jasperkm @AlexLin Can you try this?

              Go to settings, List items, and delete all the entries in Default Gcodes, and hit apply.

              Z-Bot CoreXY Build | Thingiverse Profile

              1 Reply Last reply Reply Quote 0
              • jasperkmundefined
                jasperkm
                last edited by jasperkm

                This fixes it, tho I dont know what is default gcodes? What happens when I delete them? I notice that the gcode I send via console now shows up in default gcode under list item

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  It used to be a list of gcode you could create that would show up in the send gcode box dropdown, but it has now become a list of any gcode you have manually entered into the console and is used as a autocomplete repository for the gcode console.

                  Good to hear that fixes it though.

                  Z-Bot CoreXY Build | Thingiverse Profile

                  1 Reply Last reply Reply Quote 0
                  • jasperkmundefined
                    jasperkm
                    last edited by

                    So am I correct in assuming that it doesn't do anything anymore, just acts like a log? Thanks a lot for the fix!

                    Phaedruxundefined 1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined
                      Phaedrux Moderator @jasperkm
                      last edited by

                      @jasperkm I'm not sure if that's the intention, but that seems to be the way it works. I miss the old way. I had used it for the various gcode commands that you need only occasionally but can never remember off the top of your head like allow cold extrude or whatever. Now I have a macro folder with those commands.

                      Z-Bot CoreXY Build | Thingiverse Profile

                      1 Reply Last reply Reply Quote 0
                      • whosrdaddyundefined
                        whosrdaddy
                        last edited by

                        I remember also doing this, had some weird items (numbers 1-5) in the GCodes list after some upgrade.
                        I deleted them and everything was fine.

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA