• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

New PanelDue firmware 1.15 beta 2

Scheduled Pinned Locked Moved
Firmware installation
9
26
5.0k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    bot
    last edited by 5 Sept 2016, 21:18

    I'm not sure if this is still the case, but on the last paneldue firmware, on 4.3" screens the on-screen keyboard blocks the output of the console. In previous versions, there was enough room to read the response of m665, but now I have to close the keyboard to see it. Any chance this has been fixed or could be?

    *not actually a robot

    1 Reply Last reply Reply Quote 0
    • undefined
      dc42 administrators
      last edited by 5 Sept 2016, 21:54

      I'll add it to the list. I recall that the vertical space on that page is tight on the 4.3 inch screen.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      1 Reply Last reply Reply Quote 0
      • undefined
        bot
        last edited by 5 Sept 2016, 23:35

        It seems that there is a lot of room around the keys now. I understand if that's needed for helping it pushing the right button, but I quite liked it the previous way. This might be starting to ask too much, but maybe a global scale factor for easier reading or button pushing could help? Maybe two settings "compact" and "comfy" kinda like gmail does.

        *not actually a robot

        1 Reply Last reply Reply Quote 0
        • undefined
          dc42 administrators
          last edited by 6 Sept 2016, 07:14

          I've just released an update that allows 2 rows of text to be viewed below the keyboard on the 4.3 inch display instead of just one.

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          1 Reply Last reply Reply Quote 0
          • undefined
            bot
            last edited by 9 Jun 2016, 16:49 6 Sept 2016, 16:48

            Awesome, thank you! Will this paneldue firmware be compatible with the old rr firmware version 1.15 beta 3?

            *not actually a robot

            1 Reply Last reply Reply Quote 0
            • undefined
              dc42 administrators
              last edited by 6 Sept 2016, 21:48

              Yes, it should work with firmware versions going back quite a long way, except for the new support for a second SD card.

              Duet WiFi hardware designer and firmware engineer
              Please do not ask me for Duet support via PM or email, use the forum
              http://www.escher3d.com, https://miscsolutions.wordpress.com

              1 Reply Last reply Reply Quote 0
              • undefined
                demonio669
                last edited by 6 Sept 2016, 22:53

                Trying to upgrade to 1.15 beta3 I accidentaly broke PanelDue's USB connector . Can I update the firmware via the Serial connection that links the paneldue with the Duet or only from the USB ?.

                Sorry for the off-topic!!

                1 Reply Last reply Reply Quote 0
                • undefined
                  dc42 administrators
                  last edited by 7 Sept 2016, 06:43

                  Uploading via serial is possible in principle, but I've never tried it. You would need a USB to serial converter, available very cheaply on eBay. The alternative is to cut the end off a USB cable and solder the wire ends to the board.

                  PS - if you don't mind the slightly messy soldering, I can send you one of my spare prototype PanelDue boards for you to use as a replacement.

                  Duet WiFi hardware designer and firmware engineer
                  Please do not ask me for Duet support via PM or email, use the forum
                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                  1 Reply Last reply Reply Quote 0
                  • undefined
                    bot
                    last edited by 7 Sept 2016, 17:38

                    I think one time I was able to flash the paneldue firmware through the duet USB, but I can't confirm that because I was never able to do it again. (And maybe I was dreaming the first time.)

                    If I did achieve this, it would have been by putting both the duet and the paneldue into the "ready to receive programming mode" by erasing and resetting… and then discovering which of the two com ports was the panel due.

                    *not actually a robot

                    1 Reply Last reply Reply Quote 0
                    • undefined
                      demonio669
                      last edited by 9 Jul 2016, 19:38 7 Sept 2016, 19:37

                      @dc42:

                      Uploading via serial is possible in principle, but I've never tried it. You would need a USB to serial converter, available very cheaply on eBay. The alternative is to cut the end off a USB cable and solder the wire ends to the board.

                      PS - if you don't mind the slightly messy soldering, I can send you one of my spare prototype PanelDue boards for you to use as a replacement.

                      Thank you for you offer but I prefer to try to solver a usb connector to paneldue. And if I fail I'll buy a paneldue directly from you to help to support your work!

                      If you think that is possible to upload the firmware via de serial connection that links paneldue to the duet can you modify your firmware to support a

                      M997 S4 (where S4 is the paneldue' s firmware) ?

                      Thanks in advance!

                      1 Reply Last reply Reply Quote 0
                      • undefined
                        dc42 administrators
                        last edited by 7 Sept 2016, 19:40

                        @demonio669:

                        If you think that is possible to upload the firmware via de serial connection that links paneldue to the duet can you modify your firmware to support a M997 S4 (where S4 is the paneldue' s firmware) ?

                        That's an interesting idea! But it will have to go to the bottom of the firmware wishlist, because there is so much else to do.

                        Duet WiFi hardware designer and firmware engineer
                        Please do not ask me for Duet support via PM or email, use the forum
                        http://www.escher3d.com, https://miscsolutions.wordpress.com

                        1 Reply Last reply Reply Quote 0
                        • undefined
                          demonio669
                          last edited by 7 Sept 2016, 20:06

                          @dc42:

                          @demonio669:

                          If you think that is possible to upload the firmware via de serial connection that links paneldue to the duet can you modify your firmware to support a M997 S4 (where S4 is the paneldue' s firmware) ?

                          That's an interesting idea! But it will have to go to the bottom of the firmware wishlist, because there is so much else to do.

                          Doing this that way (by M997 command ), we can unify the firmware update process in a single mechanism

                          Yes! no problem if you put in the bottom of your list. Do you want that I create a post in the firmware wish list category with this topic ?

                          1 Reply Last reply Reply Quote 0
                          • undefined
                            Eddiie
                            last edited by 9 Sept 2016, 08:01

                            Broke my usb connector, too. 😕
                            Soldered usb cable on.

                            1 Reply Last reply Reply Quote 0
                            • undefined
                              jamesarm97
                              last edited by 10 Sept 2016, 23:08

                              I noticed that on my PanelDue the Active temperature for the Bed shows -273 on startup until I set it to anything else. The extruder shows 0 like it should. Probably just cosmetic or a variable initialization problem.

                              1 Reply Last reply Reply Quote 0
                              • undefined
                                dc42 administrators
                                last edited by 11 Sept 2016, 06:00

                                That's because -273 is what it is set to. I believe DWC displays 0 when it sees -273 as the active or standby temperature, but PanelDue doesn't do that. You can put M140 S0 in config.g if it bothers you

                                Duet WiFi hardware designer and firmware engineer
                                Please do not ask me for Duet support via PM or email, use the forum
                                http://www.escher3d.com, https://miscsolutions.wordpress.com

                                1 Reply Last reply Reply Quote 0
                                • undefined
                                  jamesarm97
                                  last edited by 11 Sept 2016, 13:16

                                  Ok. Thanks. Is that just in case a bed thermistor isn't connected it won't think it needs to raise the bed temp to 0 and causes it to heat?

                                  1 Reply Last reply Reply Quote 0
                                  • undefined
                                    dc42 administrators
                                    last edited by 11 Sept 2016, 15:43

                                    I don't think there is a particular reason for it. The hot end temperature Is the same, however most people put G10 commands in config.g to set the temperatures to zero.

                                    Duet WiFi hardware designer and firmware engineer
                                    Please do not ask me for Duet support via PM or email, use the forum
                                    http://www.escher3d.com, https://miscsolutions.wordpress.com

                                    1 Reply Last reply Reply Quote 0
                                    • undefined
                                      Dougal1957
                                      last edited by 13 Sept 2016, 13:48

                                      David

                                      Don't know if this is a bug at all but on my V1.0 PanelDUE Controller and 4.3 inch screen running 1.15B3 I no longer get the Gcode file list so can't print from it?

                                      DWC Work's fine and all other FW is upto Date FW 1.15c Wifi at 1.02 and DWC 1.12.

                                      Any ideas? Think I may roll back to 1.14 on the Panel in stages to see what happens?

                                      Doug

                                      Doh feel like a complete wally now just re-read the change log and see you've moved the SD Card to control Page!!

                                      I was looking on the Print page for it Doh.

                                      1 Reply Last reply Reply Quote 0
                                      • undefined
                                        dc42 administrators
                                        last edited by 13 Sept 2016, 15:50

                                        Yes, I decided it made more sense on the control page - because all the other commands I use just before starting a print are also there.

                                        Duet WiFi hardware designer and firmware engineer
                                        Please do not ask me for Duet support via PM or email, use the forum
                                        http://www.escher3d.com, https://miscsolutions.wordpress.com

                                        1 Reply Last reply Reply Quote 0
                                        • undefined
                                          Zesty_Lykle
                                          last edited by 17 Sept 2016, 07:50

                                          I cannot update my PanelDue because I cannot get the BOSSAC installed. It starts to install and then gives an error.
                                          In this case I will revert to the definition of insanity, and try it again. For the 5th time.

                                          Nope. Setup wizard ended prematurely.

                                          Lykle
                                          Design, make and enjoy life

                                          Co Creator of the Zesty Nimble

                                          1 Reply Last reply Reply Quote 0
                                          11 out of 26
                                          • First post
                                            11/26
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA