Macros do not load while ATX is off

[windiesel]

Hi,

my printer has two powersuplys, a 5V and 24V. I have a SSR build in to switch the 24V.
Because there is no button on the Paneldue to switch the printer on I wrote a Macro with M80; .
Since I updated the paneldue frimeware the Macros load only if the 24V is on. So I have to type in M80 manually.
If I switch 24V off the macros stay.
Is there any solution for this?

best regards
Kevin

[dc42]

This is on the list to be fixed in the next PanelDue firmware release.