G28 Z probe off set

[nickt]

When I run G28 ( x and y all fine ) the z axis lowers and the probe misses the bed as per picture . How can i compensate for this please .
I think i can not print with out homing all the axis first ???

Thanks

[Stephen6309]

@nickt Add a G1 line that moves the probe to a safe place, like the center of the bed.

[dc42]

@stephen6309 said in G28 Z probe off set:

@nickt Add a G1 line that moves the probe to a safe place, like the center of the bed.

... to your homez.g file and to the Z homing part of your homeall.g file. See https://duet3d.dozuki.com/Wiki/ConfiguringRepRapFirmwareCartesianPrinter#Section_Homing_Z_using_a_Z_probe for examples.