Setting z probe as z min/ z offset setup.

[Gregory]

Hey, I am somewhat new to the duet firmware and have had some trouble getting instructions for setting up a bl touch as my z min endstop for homing. Also does anyone know what + or - on the z offset does what makes it lower and what makes is higher.

Thankyou.
Gregory

[imrj]

plenty of doc man, google is your friend

https://betrue3d.dk/bltouch-on-duet-wifi-configuratio-and-usage/

[dc42]

You may also find these wiki pages useful:

https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probe#Section_BLTouch
https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe
https://duet3d.dozuki.com/Wiki/ConfiguringRepRapFirmwareCartesianPrinter#Section_Homing_Z_using_a_Z_probe