Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Wifi Signal strength

    Scheduled Pinned Locked Moved
    General Discussion
    2
    4
    831
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Torroundefined
      Torro
      last edited by

      Hi,

      The printer is back in the enclosure. A s long as it was on the work bench, i had no Problems with connectivity.

      But now, there are often Problems. Is there a way to check, if the wifi Connection is strong enough? I have a wlan repeater on the way, but maybe, it's something else, that causes Problems.

      The enclosure is just wood and a few screws.

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by

        https://duet3d.dozuki.com/Wiki/WiFi_disconnections_and_AJAX_timeout_errors

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • Torroundefined
          Torro
          last edited by

          Thanks! A wifi range extender did the Job. Signal strength before - 77, now - 36.

          But the fix IP changed... Don't know why, but as long as i know the IP, it's ok...

          dc42undefined 1 Reply Last reply Reply Quote 0
          • dc42undefined
            dc42 administrators @Torro
            last edited by

            @torro said in Wifi Signal strength:

            Thanks! A wifi range extender did the Job. Signal strength before - 77, now - 36.

            But the fix IP changed... Don't know why, but as long as i know the IP, it's ok...

            That will be because the IP address assigned by the router is associated with the MAC address, and it's probably seeing the MAC address of the range extender instead of the MAC address of the Duet.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA