Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Tevo Little Monster Power Supply Wiring

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    2
    401
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • sslouchundefined
      sslouch
      last edited by sslouch

      I have added a Duet Wifi and smart effector to my TLM. Can someone help me to identify which wires from the power supply connector mounted on the control box are for the Power In 12-25V and which are for the heated bed? I thought I labelled them when I removed from the old board but it appers not 😞 I have seen a few pictures but it is hard to tell which is which. Can I tell the difference with a multimeter? Thanks in advance for your help.

      1 Reply Last reply Reply Quote 0
      • peirofundefined
        peirof
        last edited by

        I have a TLM.... Use a multimeter

        A) with all disconnected wires of bed don't have tension.
        B) Wires from psu have over 25v of tension
        C) for or less in my case, the red wire is the positive

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA