Time estimates are of

[dc42]

That is indeed odd. Which one is closest to being correct?

[R3play]

@dc42 The one in DWC seems to be correct.

[dc42]

Is the PanelDue still updating? Or could the display be frozen from a previous print? If it's frozen, try pressing the Reset button on PanelDue.

[R3play]

@dc42 Just as you wrote that I was thinking the same.
Paneldue is still responsive however it doesn't seem to update.
Checking the console I'm seeing this:

[dc42]

You may have a bad connection in the Dout wire from PanelDue to URXD on the Duet.

[R3play]

Since it's printing right now I will not do anything with it. But how would I have to check if I have a bad connection?

[dc42]

If it is a bad connection, it will probably fail completely, or may have already done so.

[R3play]

@dc42 I'll check it once I get home from work.
Does this fall under warranty btw?

[dc42]

@r3play said in Time estimates are of:

@dc42 I'll check it once I get home from work.
Does this fall under warranty btw?

What cable are you using between the PanelDue and the Duet?

[R3play]

@dc42
The 4 wire cable.
Btw: Just turned my printer back on, didn't change anything or didn't look yet.
But the Paneldue reacts now when I turn on a heater or so..