• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

duet 2 wifi ona ctc dual help plz

Scheduled Pinned Locked Moved
Duet Hardware and wiring
4
91
7.5k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    twistedechos
    last edited by 22 Mar 2019, 00:30

    ok i got the distance fixed but its like it don't recognize the x end stop command i have put M574 X1 Y2 Z2 S0
    and M574 X2 Y2 Z2 S0 but nether work y and z are great now

    undefined 1 Reply Last reply 22 Mar 2019, 02:56 Reply Quote 0
    • undefined
      Phaedrux Moderator @twistedechos
      last edited by 22 Mar 2019, 02:56

      @twistedechos when you click the x endstop by hand does the light on the endstop change? Does the light on the duet change? Does the endstop status in the web control show that it's pressed? Or if you send M119 while it's pressed?

      Z-Bot CoreXY Build | Thingiverse Profile

      1 Reply Last reply Reply Quote 0
      • undefined
        twistedechos
        last edited by 22 Mar 2019, 15:01

        lights work it says all of them are not stopped

        1 Reply Last reply Reply Quote 0
        • undefined
          twistedechos
          last edited by 22 Mar 2019, 15:05

          0_1553267064967_Screenshot (1).png all of them are pressed and lit up in this pic

          1 Reply Last reply Reply Quote 0
          • undefined
            twistedechos
            last edited by 22 Mar 2019, 16:30

            I think i got it figured out for my head to rap around it i had to go right it all from scratch using his files as a reference. if it works you will see some files posted on here if not ill be back lol

            1 Reply Last reply Reply Quote 0
            • undefined
              Phaedrux Moderator
              last edited by 22 Mar 2019, 17:10

              If you pot your current config.g and homing files I can give some more feedback on what to change.

              Z-Bot CoreXY Build | Thingiverse Profile

              undefined 1 Reply Last reply 22 Mar 2019, 18:14 Reply Quote 0
              • undefined
                deckingman @Phaedrux
                last edited by 22 Mar 2019, 18:14

                @phaedrux said in duet 2 wifi ona ctc dual help plz:

                If you pot your current config.g and homing files .................

                What sort of compost would you recommend and how often should he water them?

                (Sorry - just couldn't resist....) ☺

                Ian
                https://somei3deas.wordpress.com/
                https://www.youtube.com/@deckingman

                1 Reply Last reply Reply Quote 1
                • undefined
                  twistedechos
                  last edited by 23 Mar 2019, 02:22

                  3_1553307719824_homez.g 2_1553307719824_homey.g 1_1553307719824_homex.g 0_1553307719823_homeall.g i have not messed with any of these yet

                  1 Reply Last reply Reply Quote 0
                  • undefined
                    Phaedrux Moderator
                    last edited by 23 Mar 2019, 02:30

                    And your config.g as it is now?

                    Z-Bot CoreXY Build | Thingiverse Profile

                    1 Reply Last reply Reply Quote 0
                    • undefined
                      twistedechos
                      last edited by 23 Mar 2019, 13:49

                      0_1553348953660_config.g

                      undefined 1 Reply Last reply 23 Mar 2019, 13:50 Reply Quote 0
                      • undefined
                        twistedechos @twistedechos
                        last edited by twistedechos 23 Mar 2019, 13:50

                        i need to fix the M574 i think i should be x2 y1 z2 s0

                        1 Reply Last reply Reply Quote 0
                        • undefined
                          twistedechos
                          last edited by 23 Mar 2019, 13:57

                          the files i got the guy said he has a bigger bed so i will have to change that too i think

                          1 Reply Last reply Reply Quote 0
                          • undefined
                            Phaedrux Moderator @Phaedrux
                            last edited by 23 Mar 2019, 17:48

                            @twistedechos said in duet 2 wifi ona ctc dual help plz:

                            i need to fix the M574 i think i should be x2 y1 z2 s0

                            As I said above, based on your description of the end stop positions I think this should be your M574:

                            @phaedrux said in duet 2 wifi ona ctc dual help plz:

                            So you'll need to modify the endstop configuration in config.g to match the position of the endstops.
                            M574 X2 Y1 Z1 S0

                            Have you tried that one? X endstop to the right, Y to the front, Z towards the nozzle.

                            Z-Bot CoreXY Build | Thingiverse Profile

                            1 Reply Last reply Reply Quote 0
                            • undefined
                              Phaedrux Moderator
                              last edited by Phaedrux 23 Mar 2019, 17:57

                              For the Z homing files you posted, it looks like the thingivese files are configured to work with a Z probe, which you do not have. So you'll have to follow the comments in there to switch to the endstop homing.

                              Like this:

                              ; homez.g
                              ; called to home the Z axis
                              ;
                              ; generated by RepRapFirmware Configuration Tool on Sat Jul 01 2017 14:45:41 GMT+0800 (Malay Peninsula Standard Time)
                              ; Move Extruder out of the way
                              G90
                              G1 S2 X8 Y-5 F150000
                              ; Lift Z relatively to current position
                              G91
                              G1 S2 Z5 F150000
                              ; Code for legacy switch Endstop home Z ENDSTOP Z uncomment below section if the legacy micro switch endstop for Z is used
                              ; Home Z against legacy switch enstop
                              G91
                              G1 Z-155 F180 S1 ; rough home Z axis
                              G1 Z5 F500 ; move down by 5mm
                              G1 Z-155 F45 S1 ; fine home z axis
                              ; Adjust Z distance from Z endstop <UPDATE> Optional to change Z0 position.
                              ;G90
                              ;G1 Z0.00 F500 ; additional distance from bed
                              ;G92 Z0
                              ; Back to absolute positioning
                              ;G90
                              ; Code for Sensor Based Z Homing <ENDSTOP Z> comment out below section if the legacy micro switch endstop for Z is used
                              ; Go to first bed probe point and home Z
                              ;G1 X156 Y64 F150000 ; <UPDATE> update to desired probing point
                              ;G30
                              ; Uncomment the following lines to lift Z after probing
                              G91
                              G1 Z5 F2500
                              G90
                              ; homey.g
                              ; called to home the Y axis
                              ;
                              ; generated by RepRapFirmware Configuration Tool on Sat Jul 01 2017 14:45:41 GMT+0800 (Malay Peninsula Standard Time)
                              ; Lift Z relative to current position
                              G91
                              G1 S2 Z5 F150000
                              G90
                              ; Move quickly to Y axis endstop and stop there (first pass)
                              G1 Y155 F1800 S1
                              ; Go back a few mm
                              G91
                              G1 Y-5 F150000
                              G90
                              ; Move slowly to X axis endstop once more (second pass)
                              G1 Y155 F360 S1
                              ; Lower Z again
                              G91
                              G1 S2 Z-5 F150000
                              G90
                              ; homex.g
                              ; called to home the X axis
                              ;
                              ; generated by RepRapFirmware Configuration Tool on Sat Jul 01 2017 14:45:41 GMT+0800 (Malay Peninsula Standard Time)
                              ; Lift Z relative to current position
                              G91
                              G1 S2 Z5 F150000
                              G90
                              ; Move quickly to X axis endstop and stop there (first pass)
                              G1 X290 F1800 S1
                              ; Go back a few mm
                              G91
                              G1 X-5 F150000
                              G90
                              ; Move slowly to X axis endstop once more (second pass)
                              G1 X290 F360 S1
                              ; Lower Z again
                              G91
                              G1 S2 Z-5 F150000
                              G90
                              ; homeall.g
                              ; called to home all axes
                              ;
                              ; generated by RepRapFirmware Configuration Tool on Sat Jul 01 2017 14:45:41 GMT+0800 (Malay Peninsula Standard Time)
                              ; Relative positioning
                              G91
                              ; Lift Z
                              G1 S2 Z5 F150000
                              ; Course home X and Y
                              G1 X290 Y-155 F1800 S1
                              ; Move away from the endstops
                              G1 X-5 Y5 F150000
                              ; Fine home X and Y
                              G1 X290 Y-155 F360 S1
                              ; Code for legacy switch Endstop home Z ENDSTOP Z uncomment below section if the legacy micro switch endstop for Z is used
                              ; Move Extruder out of the way
                              G90
                              G1 X8 Y-5 F150000
                              ; Home Z against legacy switch enstop
                              G91
                              G1 Z-155 F180 S1 ; rough home Z axis
                              G1 Z5 F500 ; move down by 5mm
                              G1 Z-155 F45 S1 ; fine home z axis
                              ; Adjust Z distance from Z endstop <UPDATE> Optional to change Z0 position.
                              ;G90
                              ;G1 Z0.00 F500 ; additional distance from bed
                              ;G92 Z0
                              ; Absolute positioning
                              G90
                              ; Code for Sensor Based Z Homing <ENDSTOP Z> comment out below section if the legacy micro switch endstop for Z is used
                              ; Go to first bed probe point and home Z
                              ;G1 X156 Y64 F150000 ; <UPDATE> update to desired probing point
                              ;G30
                              ; Uncomment the following line to lift the nozzle after probing
                              G1 Z5 F2500

                              I also modified the home X and Y to allow raising the Z axis out of the way and to hopefully move in the right direction based on what you've described.

                              Z-Bot CoreXY Build | Thingiverse Profile

                              undefined 1 Reply Last reply 25 Mar 2019, 17:40 Reply Quote 0
                              • undefined
                                twistedechos @Phaedrux
                                last edited by 25 Mar 2019, 17:40

                                @phaedrux thank you ill go through it and try to fix it and repost

                                1 Reply Last reply Reply Quote 0
                                • undefined
                                  twistedechos
                                  last edited by 28 Mar 2019, 18:04

                                  @phaedrux said in duet 2 wifi ona ctc dual help plz:

                                  ; homez.g
                                  ; called to home the Z axis
                                  ;
                                  ; generated by RepRapFirmware Configuration Tool on Sat Jul 01 2017 14:45:41 GMT+0800 (Malay Peninsula Standard Time)

                                  ; Move Extruder out of the way
                                  G90
                                  G1 S2 X8 Y-5 F150000

                                  ; Lift Z relatively to current position
                                  G91
                                  G1 S2 Z5 F150000

                                  ; Code for legacy switch Endstop home Z ENDSTOP Z uncomment below section if the legacy micro switch endstop for Z is used
                                  ; Home Z against legacy switch enstop
                                  G91
                                  G1 Z-155 F180 S1 ; rough home Z axis
                                  G1 Z5 F500 ; move down by 5mm
                                  G1 Z-155 F45 S1 ; fine home z axis
                                  ; Adjust Z distance from Z endstop <UPDATE> Optional to change Z0 position.
                                  ;G90
                                  ;G1 Z0.00 F500 ; additional distance from bed
                                  ;G92 Z0

                                  ; Back to absolute positioning
                                  ;G90

                                  ; Code for Sensor Based Z Homing <ENDSTOP Z> comment out below section if the legacy micro switch endstop for Z is used
                                  ; Go to first bed probe point and home Z
                                  ;G1 X156 Y64 F150000 ; <UPDATE> update to desired probing point
                                  ;G30

                                  ; Uncomment the following lines to lift Z after probing
                                  G91
                                  G1 Z5 F2500
                                  G90

                                  on this for legacy switch endstop what dose he mean by uncomment below is he saying to get rid of the ; or add one in?

                                  1 Reply Last reply Reply Quote 0
                                  • undefined
                                    Phaedrux Moderator
                                    last edited by 28 Mar 2019, 18:27

                                    In my example I posted I uncommented the switch part and commented out the z probe part because you don't have one.

                                    Z-Bot CoreXY Build | Thingiverse Profile

                                    undefined 1 Reply Last reply 28 Mar 2019, 18:45 Reply Quote 0
                                    • undefined
                                      twistedechos @Phaedrux
                                      last edited by 28 Mar 2019, 18:45

                                      @phaedrux ok thank you so i got it to try to home on its way to home the y axis bounces off the endstop and the z will bounce off the bottom away from the endstop x will try to bounce away from the endstop aswell

                                      1 Reply Last reply Reply Quote 0
                                      • undefined
                                        twistedechos
                                        last edited by 28 Mar 2019, 19:59

                                        ok i got everything homing but y likes to bounce off of the endstop still4_1553803169845_homez.g 3_1553803169845_homey.g 2_1553803169845_homex.g 1_1553803169845_homeall.g 0_1553803169845_config.g

                                        1 Reply Last reply Reply Quote 0
                                        • undefined
                                          Phaedrux Moderator
                                          last edited by 28 Mar 2019, 20:03

                                          What do you mean by bounce?

                                          Z-Bot CoreXY Build | Thingiverse Profile

                                          1 Reply Last reply Reply Quote 0
                                          65 out of 91
                                          • First post
                                            65/91
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA