Idiots guide to splash screen
-
Hi all wondered if one of you would help me out please I have resized an image to 800 x 480 as a bmp then run it though the erscher converter and now have a bin file of that.
I’m struggling to understand how I integrate this into the 5”-7” int without logo bin
Ihave both files on the desktop tried many times to the instructions on github I’m just not getting it -
Are you getting an error message?
You do have to be careful about getting the file names correct.
-
Hi J
My Logo is WILE E COYOTE and named WILE E.bin the file has converted fine to a bin file and is on the desktop along with the original file for the PanelDue-5.0i-7.0i-nologo.binSo instruction is to "Run this Windows command to append it to the binary: copy /b PanelDue-v3-5.0-nologo.bin+myimage.bin PanelDueFirmware.bin"
I am entering the following at the command prompt and its not working.
copy /b PanelDue-5.0i-7.0i-nologo.bin+WILE E.bin PanelDueFirmware.bin
I receive an error message
Really sorry if Im explaining it badly i think Im nearly there just the letter is throwing me.
Your help much appreciated. -
It could be that there are spaces in your filename.
Copy the file to something simple say WILEE.bin and try the command line again.
HTH
Paul -
@paulhew Thanks Paul
-
Should the program for converting the bitmap to bin actually open up
-
No it's all command line only
-
its good practice to avoid spaces in file names, but if you do use them, then quotes or escaping them is necessary on the command line.
copy /b PanelDue-5.0i-7.0i-nologo.bin + "WILE E.bin" PanelDueFirmware.binwould likely work. -
Thank you all for your help have now got to grips with it much appreciated!
