Why this message???
-
Hi,
i have moded my printer to linear rails.... and strange console message:
1- FIRST. Calibration
Results: G32
Calibrated 6 factors using 25 points, deviation before 0.169 after 0.020Seems very good
2- SECOND. Compensation
And... i recive a message by console:
"G29 Warning: the height map has a substantial Z offset. Suggest use Z-probe to establish Z=0 datum, then re-probe the mesh. 101 points probed, min error -0.005, max error 0.293, mean 0.152, deviation 0.068 Height map saved to file heightmap.csv"
Maybe adjusts endstops?
-
did you save your g32 calibration results in your config.g?