@dc42 said in QOI image from PS 2.6.0-a4 aborts print on RRF 3.5.0b2:

Have you already posted your start.g in this thread? If not, please do so.

Here you go:

; start.g v1.3 ; Called whenever you start a print, run before slicer gcode at start of print echo "start.g start" G21 ; Set units to millimeters G90 ; Use absolute coordinates M83 ; Use relative distances for extrusion M140 S65 ; Set bed temperature to 65°C if exists(global.sb_leds) set global.sb_leds = "heating" ; StealthBurner LED status T0 ; Select Tool 0 M291 P"Print started, preheating." T10 ; Info message G4 S1 ; Wait 1 second M220 S100 ; Reset speed factor M221 S100 ; Reset extrusion factor M290 R0 S0 ; Reset baby stepping M107 ; Turn off the part cooling fan if heat.heaters[0].current < 65 M140 S65 ; Set bed temperature to 65°C M116 H0 ; Wait for the bed to reach its temperature echo "start.g end