Duet Maestro or Ethernet for a large nozzle printer?
singhm29 last edited by
I have a printer with a super volcano hotend running a 1.4mm nozzle which doesn't need to move particularly fast. I grabbed a duet ethernet and a duet maestro with the intent to put the ethernet on this printer but im now thinking it might be more beneficial for a delta printer that I am also changing up. Bit of a toss-up right now would be interested to hear what people think would make more sense
Phaedrux last edited by
I think the Ethernet would make more sense on the Delta because you gain an FPU that the Maestro lacks.
Veti last edited by
it also depends on what you mean by not particularly fast.
the maestro supports stealthchop2 which can make your printer nearly silent at low speeds.