Duet3D and dual X carriage

[ocornet]

Hello,

First message for me here and happy owner of a DUET3D Wifi on a CR-10.

I just have question for a friend of mine, is the DUET3D could be capable of managing a dual X carriage like on the Formbot T-REX3 ?
I'm aware that in this case I need the expansion board to increase the stepper driver number as 6 motors are to be driven.

Thanks in advance,

Oliver

[Martin1454]

Sure no problem - Look up "Duet wifi IDEX"

[ocornet]

Thank you very much Martin !