Printer stops in middle of print - no auto reboot
delta1 last edited by
I have had a issue several times with different prints where the printer will start and run fine and then for an unknown reason to me it just stops moving. The temps stay up and I have to do an emergency stop to reset and start again. Here is the M122 report.
Phaedrux last edited by
I notice you're using 2.03RC1. Perhaps try 2.03RC3, or revert back to 2.02 to see if the issue remains.
delta1 last edited by delta1
Thanks - i will give that a go.
Reverted back to 2.02 to correct.