Linear Rail mod...



  • Hi,

    I have finished of mod my delta printer, a Tevo Little Monster.... I have installed linear rails.... Chinese linear rails, tweaked, for smooth displacement...

    And can say without doubts, its the best mod I have do to the printer, after Duet, of course...

    Before mod, I have ripples in surface... I supposed to why was dificult to adjusts escentric wheels of carriages... Whith linear rails, ripples has gone

    I only have do 2 prints... But are very good... This evening I attach images of the mod, and results..


  • administrators

    When I upgraded my large Kossel from wheeled carriages to linear rails, I saw a big reduction in calibration deviation.



  • Hi...

    In my case... Deviation its lower, think remember 0,2 mmm.. Only that height map in compensation show waves... After send photos



  • hi....

    Image of bed compensation heighmap AFTER linear rail Mod:

    0_1561301670733_After LR.jpg

    Its very good.... but i have to say that before mod, results are better.

    Image of bed compensation heightmap BEFORE linear rail Mod, stock carriages:

    0_1561301781049_Before LR.png

    I have to say, that results BEFORE they were strangely good...


Log in to reply