Duet3d ethernet + mini IR probe on WASP 60100?

[CHarding]

I have a Wasp 60100 delta printer that I want to run with a Duet3d Ethernet board and add a Mini IR Probe. I've just finished upgraded a Anycubic Kossel Plus with a Duet3d Ethernet board so I have some experience, however, I'm still pretty clueless with electronics. For the AnyKubic, somebody had already figured out decent settings for config.g to start with and I've love avoiding having to figure them out for myself on the WASP. So, if somebody has settings for config.g and could share them with me, I'd be ever so gratefull!