Using a 12v power supply
San Juan last edited by
Just got a Maestro and going to put it in my modified FLSun 300x300x400 printer.
With my 12v power supply, do I need to configure or move the jumpers for the fans? The stock jumper set up is for 24v, but if only 12v power, do I need to do anything?
Phaedrux last edited by
The fan jumper will either supply 5v, or VIN power. So if you have a 12v supply, it will provide 12v, as there is no way to get 24v from 12v.
DocTrucker last edited by
...as there is no way to get 24v from 12v.
...on the duet boards.