PanelDue cant update

A Former User

C:\Program Files (x86)\BOSSA\bossac.exe" --port=COM5 -e -w -v -b D:\PanelDue-v2-7.0C.bin

wrong use of "

try "C:\Program Files (x86)\BOSSA\bossac.exe" --port=COM5 -e -w -v -b D:\PanelDue-v2-7.0C.bin

droftarts

The single quote mark " is messing up the command. It's probably easiest to cd (change directory) to the folder that contains bossac, then you don't have to worry so much about getting the path right.
cd "C:\Program Files (x86)\BOSSA\"
Then run it from there with
bossac.exe --port=COM5 -e -w -v -b D:\PanelDue-v2-7.0C.bin
Ian
@bearer beat me to it!

TPJensen

@bearer @droftarts

Thank you that worked

can I on the paneldue set TEMP with onscreen keybord or macros ?

or is the only thing to do is use

-5 -1 SET +1+5 ?

Phaedrux

@TPJensen You can set temps using macros or the onscreen keyboard if you wish.

TPJensen

@Phaedrux said in PanelDue cant update:

@TPJensen You can set temps using macros or the onscreen keyboard if you wish.

How fo I get it to use the onscreen keyboard for TEMP ? I only get -5 -1 SET +1+5 if I choose the temp

A Former User

you don't get a keyboard for the temp, you get a console for generic g-code.

dc42

If you hold your fingernail on the +5 it will auto-repeat, allowing you to go from 0 to printing temperature quite quickly.

TPJensen

@dc42 said in PanelDue cant update:

If you hold your fingernail on the +5 it will auto-repeat, allowing you to go from 0 to printing temperature quite quickly.

Super that works.. Thank you

Phaedrux

If your intention is to do a preheat or something you could create a macro with the temp command and name it 0_Preheat and it should show up in the control screen in the quick macro list.

TPJensen

@Phaedrux said in PanelDue cant update:

Nice Thanks again now preheat is setup