Buttons to raise / lower the temperature



  • Hi,

    this is a proposal for DWC. Like there is a control to raise and lower the printhead, the microstepping control in real time, that there is something similar for temperature.
    Next to the Nozzle temperature selector, there was a button to raise and another to lower the temperature, in small increments (1º, 2º, configurable)....
    I think it would be useful for several things, I can think of:

    • Adjust the temperature to a new filament in real time ... you could raise and lower the temperature for a new filament, until you find the right one.
    • If you want to increase, or reduce, the printing speed. You could adjust the temperature.
    • If as in my case, this has occurred to me, I want to adjust the temperature sensor, M305.

    I think it would be useful for many things, which right now you have to do by adding the temperature to the DWC list or by console .....


Log in to reply