have problems with mesh bed leveling
-
@lui2004 said in have problems with mesh bed leveling:
is it correct ?
You're very close:
M98 P"Datum.g" -
yeah i will do my best ,i will learn
-
@infiniteloop said in have problems with mesh bed leveling:
You're very close:
... as was I. Let's try it again:
M98 P"Zdatum.g"Sorry.
-
@lui2004 said in have problems with mesh bed leveling:
and then i can insert in Simplify3d in Startscript
M98 Zdatum.g
As stated by the other poster your syntax is not quite correct.
But consider the approach of having just two calls in S3D to macros that do everything you need to start printing and to finish printing.
That those macro can call other macros if that makes things easier.
My goal is to minimize changes I have to make in S3D and keep all the changes in the Duet.
Frederick
