Support for KISSlicer print/filament estimates
-
I am currently trying out KISSSlicer 2 alpha builds, and like them much. DWC 2 does not show the included estimates for print time or filament usage. The format is
[...] ; Calculated-during-export Build Time: 130.62 minutes [...] ; Filament used per extruder: ; Ext #1 = 10355.66 mm (24.908 cm^3) [...]It would be nice to get those numbers out (-:
<>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>
-
@oliof said in Support for KISSlicer print/filament estimates:
I am currently trying out KISSSlicer 2 alpha builds, and like them much. DWC 2 does not show the included estimates for print time or filament usage. The format is
[...] ; Calculated-during-export Build Time: 130.62 minutes [...] ; Filament used per extruder: ; Ext #1 = 10355.66 mm (24.908 cm^3) [...]It would be nice to get those numbers out (-:
I'm sure I've added support for KissSlicer before. I wish slicer providers would choose a format for these comments and stick to it. It would be even better if they could all agree to use the same format.
Please provide a sample GCode file.
-
@oliof it is recognised if you delete the hash, making Ext 1 instead of Ext #1. I have been doing this with a little macro in notepad+, but there is probably a better way to do it
-
@dc42 Here is a sample file:
-
Fixed in 2.04RC4
