topic_solved Duet Wifi 2 connected to network, but unable to access DWC
Like the title says I have it connected via USB to my computer through YAT. When I run M552 I get "ok<LF>WiFi module is connected to access point My Eero, IP address 192.168.1.17<LF>"
When I type in that IP address nothing connects. The DWC Test page also does not work.
My computer is connected to the same network
My android phone will not connect either
I've used Chrome and Edge
Restarting the Duet
restarting the router
Deleting the network and re entering ssid and password
Can you ping that IP address from your PC?
Veti last edited by
some router disallow the communication between networks, or even between wireless clients.
for example sometimes called guest network isolation.
Looks like you're using and Eero, so I'd think you would have to add it to the list of known devices by giving it a 'nickname' and assign a device group to make it accessible. See https://support.eero.com/hc/en-us/articles/211096103-How-do-I-identify-the-devices-on-my-network-and-assign-nicknames-
@dc42 the ping does not go through
@droftarts This is probably pretty close to the problem. I thought it probably had something to do with the network. Unfortunately I am not the owner of the network, so it'll take some back and forth to get this done. Thanks for your help, it is much appreciate. I will report back when I get it working.
Figured it out. both my computer and cell phone were in "Public network mode" and wouldn't communicate with other devices on the network. Thanks for the help, probably wouldn't have figured it out without it.