Firmware 3: Conditional Fan Ops (Redundant M106 "T" Parameter )



  • Hi, I am having trouble working out what a replacement M950 command would look like for this firmware v.2 M106 command.

    M106 P4 T50 F500 H3
    ; T0 Hot End Fan (Turn on for T>50 degC).

    I prefer not to have my hot end cooling fan wired into the "always on" pins for many reasons. I cannot figure out a new firmware 3 conditional statement equivalent. Any help firmware 3 users can give me would be great.

    Thanks
    Alex


Log in to reply