Z-Probe offset (RRF3.0)

ludisnet

Hi,

I have a Z-probe (IR probe) ...with offset (see image)

Should I fill it in under G31? and can you confirm the sign/direction of the offset according to my image?
G31 X20 Y-10
When i generate the bed.g (with http://www.escher3d.com/pages/wizards/wizardbed.php), do I have to fill in the offset as well ?

Thanks.

Ludis

jay_s_uk

@ludisnet
1 - Yes, use G31. It depends where you home to. If you home in the bottom left then X would be a minus value and y would be a positive.

2 - The firmware sorts the offset out itself so no adjustments to the bed file need to be made

ludisnet

Thanks for reply,

if my image is a top view, with the hexagonal nozzle in the center of the bed, my z-probe is shifted to the top left, the result would be : X-20 Y10?

jay_s_uk

Yes. You could confirm by using the jog buttons the move the nozzle in the -x and +y directions