Cannot Connect with WebInterface/Usb

ProjectK

Hey There,

got a little Problem here:

I deleted all Files on the Duet via Webinterface because after uploading configs generated by https://configurator.reprapfirmware.org/ it doesnt react anymore. I tried to reupload the original files which i backup'ed via SD card, but it didnt work either.
Now i cannot connect via WebInterface. connection via Repetier-Host works, but it wont accept any G-Code like M997/M999.

what should i do?

Servusla

Project-K
Karani

T3P3Tony

Which Duet do you have?

What does your SD card directory structure look like?

elmoret

Could you post a screenshot of your computer's Control Panel, specifically the Ports section?

ProjectK

i have the latest Duet with the ESP8266 wifi Module, i bought it like 2 months ago :3
i dont know the exact name, but its not the Ethernet one.

The firmware i was using was also the latest one (1.18 stable)

Kind regards,
Project-K
Karani

Ps.: it's my first forum thread (ever), which way do you guys recomend to upload pictures?

elmoret

Bossa program port means that the firmware on the main processor has been erased, you need to re-flash it.

https://duet3d.com/wiki/Updating_main_firmware

Fallback Procedure 3 is what you're after.

ProjectK

thanks for the reply! i will try it with SAM-BA 2.16

Atmel takes forever to send the Download link, but i will see.

i will give you feedback when it's done!

Best Regards
Project-K
Karani

T3P3Tony

As an aside, imgur works for images, just right click then "copy image address" (in english at least) then past that link in the image tabs, for example your:

becomes

ProjectK

Nice!
Now it works!! thank you guys, you're awesome!

T3P3Tony

Awesome!