Need Help looking for CR10 Max File
-
High to all and thanks to all information of you guys. I would like to up grade my Creality 10 Max printer with the duetwifi. So after some days i dont get it to work . The componets are org. BL Touch last version ED6 Vulcano Hotend with 24 V PT100 . Y-X-Z are moving End switches are working bud i strugel quite heavy with BL Touch Hotend and fans .
So i am not so in to programming
regards
Stephan
-
The CR10 is pretty similar to the Ender 3, perhaps take a look at this series of guides that goes through a lot of setup and configuration steps.
https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+1:+Wiring/37?lang=en
What exactly is wrong with the BLTouch, hotend, and fans?
Take a look here for what information to provide: https://forum.duet3d.com/topic/5909/guide-for-posting-requests-for-help
