Heater numbers incorrect in DWC 2.0.7
-
@Phaedrux Tried that too, but still the same result. Thanks
-
@chrishamm Do you have any thoughts on this?
-
@dc42 Do you have any thoughts on this issue? Thanks...Henry
-
Looks like you have 6 heaters defined (+ bed heater), but heater 6 is disabled in zprobe section.
-
@aidar Good catch!
-
@aidar Ahhh yes, very good catch. Fixed it in the Config, but that didnt fix the number issue. Thanks for the heads up.
-
If I knew HTML I would dig to find out why it displays the wrong numbers. I dont see anything in the config that might cause a discrepancy on the main HTML page, it it makes no sense that the numbers would be correct in one pane, while different in the one right next to it. Everything functions correctly when I run all six nozzles, so its not the end of the world, but would like to figure it out someday.
-
Work on DWC 2 is still progressing. Thankfully it's just a cosmetic issue. I've moved this to the DWC forum for more visibility for @chrishamm
-
@Phaedrux Thanks for the update. Yes cosmetic, but causing us to make mistakes when setting individual nozzle temperatures. We adjust the numbers in our head for now, so I hope we can untrain when the numbers are correct on DWC2. Any idea how long before DWC2 gets released?
Thanks...HD
-
This post is deleted!
