1.19.2 to 3.01-RC1
ZeroedByte last edited by
Wanted to ask a silly question, since I'm living in the stone age of firmware here.
I'm still rocking the 2017 firmware of 1.19.2. What's the highlights I've been missing?
Danal last edited by
Read the release notes, bottom up.
bearer last edited by
There was a similar thread thread not so long ago; one option that was mentioned was to use BOSSA to upgrade straight to say 3.00 release to avoid some of the caveat along the way.
However its not a subsitute for reading the change log like Danal said; although they can be found on a single page at
If your printer isn't too exotic you might want to start with a fresh config from the web configurator to save yourself from having to manually adapt it all. At the very least it would be worthwhile having a new config to compare against.