Varifying Bed Temp?
What is the most economic way of verifying the heater bed temperature? A multi surface probe would be ideal as I have glass, coated glass, and PEI on alloy to consider!
imrj last edited by
i havent had an issue with running mine up to 150c and just a chinese sensor, i also have metal plate, glass, copper sheet and PEI and it does ok, printing ABS and other tough materials and the temp readings appear to be correct or I would be having issues
A Former User last edited by
infrared temp probe and black tape?
@imrj Not so much a concern on a per-machine basis but I've six machines running with various thermistors and I would like to make things as consistent as practical.
@bearer Fair point, bit of tape on the top would be the same on each machine then and could/should be repeatable.