stepper phase
-
hey my X and Y are phasing and not homing. Z works great. I have checked the wires, and they are fine, so it must be in the code?? any idea? please
-
You can identify the correct phase pairs like this: https://duet3d.dozuki.com/Wiki/Choosing_and_connecting_stepper_motors#Section_Identifying_the_stepper_motor_phases
What exactly happens when you try to home?
Post your config.g and homing files.
-
Z auto homes normally X and Y shake or vibrate,
-
@wayne-thornton Please see https://forum.duet3d.com/topic/5909/guide-for-posting-requests-for-help
We aren't sitting next to you, and can't see your printer. You need to provide more information about the issue for us to understand what's going on, then we can hopefully give you the correct answer quickly.
Ian
