BLtouch problem with the trigger value

  • I have had problems with meshbed leveling for a week.
    when I measure the trigger height from the BLtouch I have with
    X10 Y150 a height of 0.658 / 0.652 / 0.655
    X150 Y150 a height of 0.632 / 0.632 / 0.632
    X290 Y150 a height of 0.835 / 0.840 / 0.830
    I have the problem that despite mesh bed leveling the pressure on the left goes to bed and on the right is too high and does not hold.

    Duet 2 wifi
    two independent (Z and U) Z axes and two endstops and BLtouch.

Log in to reply