U Axis Endstop



  • I am configuring an IDEX printer with a Duet Wifi. I have the U axis connected and moving, now I am working on homing.

    Currently I have the U axis endstop connected to the "E0 STOP" connector. Do I need to map this to the U axis somehow like I mapped the drives with the M584 command? If not, is it connected to the right spot?

    The X and Y endstops are connected to their corresponding connnectors. I don't have a Z endstop so there is nothing connected in that spot.

    Thanks!


  • administrators

    The E0 endstop connector is the correct place to connect your U axis homing switch.


Locked
 

Looks like your connection to Duet3D was lost, please wait while we try to reconnect.