DWC 3.1 on RRF3 - No Axis Home Icons on DWC Dashboard

[Kiwi3D]

@chrishamm said in DWC 3.1 on RRF3 - No Axis Home Icons on DWC Dashboard:

M409 K"move.kinematics"

Is that something I need to type, not sure of the question, sorry

Ray

[chrishamm]

@Kiwi3D Yes, type that in the G-code console and post the output here.

[Kiwi3D]

@chrishamm

It's just scrolling

[chrishamm]

@Kiwi3D That may explain it. Please install this firmware binary by uploading it on the System page and check if the problem persists. If it does, please try to send the M409 code again.

[Kiwi3D]

@chrishamm

I got a result 2nd time
M409 K"move.kinematics"
{"key":"move.kinematics","flags":"","result":{"deltaRadius":105.600,"homedHeight":250.000,"name":"delta","printRadius":85.0,"towers":[{"angleCorrection":0,"diagonal":215.000,"endstopAdjustment":0,"xPos":-91.452,"yPos":-52.800},{"angleCorrection":0,"diagonal":215.000,"endstopAdjustment":0,"xPos":91.452,"yPos":-52.800},{"angleCorrection":0,"diagonal":215.000,"endstopAdjustment":0,"xPos":0,"yPos":105.600}],"xTilt":0,"yTilt":0}}

[dc42]

My guess is that you have a config-override.g file in /sys on the SD card. Delete it (you can do that from DWC) and restart the Duet.

[Kiwi3D]

@chrishamm

M409 K"move.kinematics"
{"key":"move.kinematics","flags":"","result":{"forwardMatrix":[[1.000,0,0],[0,1.000,0],[0,0,1.000]],"inverseMatrix":[[1.000,0,0],[0,1.000,0],[0,0,1.000]],"name":"cartesian","tiltCorrection":{"correctionFactor":1.0,"lastCorrections":[],"maxCorrection":1.0,"screwPitch":0.50,"screwX":[],"screwY":[]}}}

[chrishamm]

@Kiwi3D The second output looks correct. You should be seeing the axis home buttons again.

[Kiwi3D]

OK....so we have the right menus now

And we now have motor movement

[Kiwi3D]

Thanks @dc42 and @chrishamm

We now have a functioning homing system

Appreciate you help

and...@SputnikOC3d - thank you too dude!!!

Cheers

Ray