Hi everyone... I am currently building a large format 3D printer with IDEX system. I've already set up an IDEX, but now I want to try something new. I use the Orion Piezo sensor as a Z-probe. this works very well in other printers. and now my question. Can I also connect a piezo sensor as a z-probe or other sensor on the second toolhead (i.e. U-axis)? so that I measure both toolheads beforehand and save the offsets. That would save a lot of adjustment work. if so, how would you implement this in the firmware? Many thanks to all of you! Regards Christian (CR-3D)

Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

Dual Z-Probe at IDEX System

Unsolved

General Discussion

1.2k

undefined

CR3D @JoergS5
last edited by

@JoergS5 said in Dual Z-Probe at IDEX System:

At the moment all toolchange files are completly empty...

This would be the next step if the system is running....
Christian from CR-3D
Homepage:
www.cr-3d.de

Facebook:
https://www.facebook.com/cr3d.official

Our Discord Server
https://discord.gg/SxRaPNuRdA

Thingiverse Profile:
https://www.thingiverse.com/cr-3d_official/about
1 Reply Last reply
Reply Quote 0

2 / 2