Solved Horizontal table leveling with RRF2 and optical endstop
-
Good Morning. A novice question with RRF. (google translate)
Is it possible to make horizontal leveling of the table using optical endstop with RRF2 and without using self-leveling probe?
Only 2 endstops, one on each side of the table, using Z and E1 drivers (each with an optical endstop).
I just want to make sure that the 2 sides of the table are leveled automatically, then I do manual leveling by the springs.
I use a duet 2 wifi.
Thank you. -
-
Thank you Droftarts!