Precision Piezo Orion in Firmware v3.x

peirof

Hi,

i have do a similar post, in Firmware....

The dude its how config Precision Piezo Orion in FW3.x?

Anyone have working Precision Piezo Orion with Firmware v3? Can share the config?

Thanks

Phaedrux

; Z-Probe
M558 P8 C"^zprobe.in" H5 R0.4 F1200 T6000 ; set Z probe type to effector and the dive height + speeds
G31 P500 X0 Y0 Z-0.1                                 ; set Z probe trigger value, offset and trigger height

Something like this should work I think.

There was also this recent thread on the topic.

peirof

thanks,

i will try later..., and give feedback