Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Filament Sensor not reporting data

    Scheduled Pinned Locked Moved Solved
    Filament Monitor
    1
    2
    199
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stuartofmtundefined
      stuartofmt
      last edited by

      I have a Bigtreetech smart filament sensor and am having difficulty getting it to work. I've read multiple posts and tried various settings but but no luck .... help 🙂

      I have wired it into the E0 endstop. Manually (by hand) pulling filament through the sensor causes the E0 endstop LED to turn on / off at (more-or-less) the advertised 7mm sensitivity.

      I (currently) have the following code in config.g

      ; Custom settings
M591 D0 P7 C"e0stop" L7 R75:125 E22 S1      ;BTT

      I have tried various ranges for R and E .

      When trying to print a job - M591 D0 reports the settings but "no data received". I can see the E0 endstop LED responsing to the filament movement.
      After a short while -- the print stops complaining of no movement ......

      I'm using RRF3 and the following:
      Board: Duet 2 WiFi (2WiFi)
      Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.1.1 (2020-05-19b2)
      Duet WiFi Server Version: 1.23

      Any and all suggestions appreciated.

      1 Reply Last reply Reply Quote 0
      • stuartofmtundefined
        stuartofmt
        last edited by

        So it turns out that I am not to be trusted ..... I got "switched around" with the E0/E1 connectors and LED's.

        All good now ... sorry for the false alarm.

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA