temp readings 2000c
-
After completing a 67 hour print I reset the duet (with the red STOP button on the display) and after rebooting my temp readings are both 2000c.
Disconnecting the bed termistor cable and shorting the pins makes no difference.
What could posibly explain this?
-
-
Thank you, but it completed the previous print without any hiccups, does it make sense that the fuse would blow just as I reset the board?
I have a Duet3 lying around, I will rebuild the machine.
-
Can you give us some more information?
https://forum.duet3d.com/topic/5909/guide-for-posting-requests-for-help
Does the fuse have continuity?
