hemera upgrade



  • ; Heaters
    M305 P0 T100000 B4138 R4700 ; Set thermistor + ADC parameters for heater 0
    M143 H0 S120 ; Set temperature limit for heater 0 to 80C
    M305 P1 T100000 B4275 R4700 ; Set thermistor + ADC parameters for heater 1
    M143 H1 S285 ; Set temperature limit for heater 1 to 285C

    above is my gcode for my heaters
    the R4700 IN THE GCODE DO I LEAVE IT IN??? AND WHAT DOES THE R4700 DO OR STAND FOR ??? I BELIEVE I REPLACE IT WITH C7.0600e-8

    ; M307 H1 A245.3, C121.7, D4.0, S0.5 ; PID
    THE PID IS COMMENTED OUT SHOULD I REMOVE UNCOMMENT AND CHANGE ANYTHING ??? is this a necessary entry



  • Got this one figuared out i have a defective thermistor taboot. Arg !! Marking solved


Log in to reply